Issue 66 of Love Patchwork & Quilting magazine came with two sets of acrylic templates to make sure your blocks are on point. If you missed the issue, never fear! Simply download a PDF version of these templates below and read our step by step guide for how to use them to make pineapple quilt blocks.
Understanding your templates
Each set of templates is comprised of a triangle and trapezoid. The smaller set will create a 4in finished square, and the larger set will create an 8in finished square. Each block consists of four rounds, with an inner and outer set of triangles around a central square (Fig 1).
How to sew a pineapple quilt block
To create the rainbow pineapple quilt block as shown, cut out the fabrics as follows:
You Will Need
From the background fabric cut:
- Inside triangles. (four (4))
- Trapezoids for Round 2 (four (4))
- Trapezoids for Round 4. (four (4))
From the contrast fabrics cut:
- Centre square (one (1)), (11⁄2in square for the small block, 21⁄2in square for the large block)
- Trapezoids for Round 1 (four (4))
- Trapezoids for Round 3 (four (4))
- Outside triangles (four (4))
Choose one set of templates for either the large or small block, and cut strips of fabric to the required width. You will need 1in wide strips for the small block and 11⁄2in wide strips for the large block.
Use the trapezoid template to cut the strips. To cut pieces for rounds 1 and 2, align the top edge of the trapezoid with one long edge of the strip. Use your rotary cutter to trim both edges. Turn the template over and cut along the right edge. Continue working in this way across the strip.
To cut pieces for rounds 3 and 4, place the marked line of the trapezoid template at one long edge of the strip, and cut as you did in the previous step.
Use the triangle template to cut the inner triangles, aligning the marked line with the fabric edge. Use the same method to cut the outer triangles, aligning the bottom edge.
Use a regular quilting ruler to cut the coloured centre square for each block. Cut a 11⁄2in square if you’re making the small block or a 21⁄2in square if you’re making the large block.
Assembling the block
Sew inner triangles to either side of your central square. Press open. Sew the remaining inner triangles to the other sides (Fig 2).
Begin sewing the trapezoids to the block. First sew the round 1 pieces, pressing each one before moving to the next (Fig 3). Then sew rounds 2, 3 and 4 (Fig 4). Finally sew the outer corners to complete the block.